Subaru unveils the 2010 Legacy


Ahead of its New York International Auto Show launch next week, Japanese automaker has unveiled its all-new 2010 Legacy. Though stylistically derivative of the outgoing model, the Legacy is larger than its predecessor and features more powerful optional engines, a standard six-speed manual transmission and an available CVT.

The 2010 Legacy was previewed by a show car at the North American International Auto Show in Detroit earlier this year and, as can be seen from the photos, the production car is true to the concept. Expect the production model to launch this summer, probably as early as the end of June.

Outside, the Legacy looks like a muscular sibling to its trim predecessor since it shares many design cues, including the front grille and c-pillar designs.

Inside, Subaru says it focused on quality materials. A new electronic parking brake eliminated the need for a traditional lever and added more space to the center console area for new cup holders and a storage bin. A three-spoke sport steering wheel with audio controls and paddle shifters for automatic-transmission models is standard and 10-way power driver’s and 4-way power passenger’s seats are optional on the base model but standard otherwise.

Subaru will continue to offer three engine choices and three basic models.

At the bottom of the lineup, the 2.5i continues with a mostly carryover 2.5-liter, 170-horsepower four-cylinder. Subaru says that a new resin-based intake manifold lowers the engine’s weight and improves low-end torque, which stands at 170 lb-ft. – now at 4,000 rpm versus 4,400 rpm before. Subaru also says that improved cooling and a revised catalyst will boost fuel economy figures above the 20/27 (manual) and 18/25 (automatic) before. The 2.5i will now come standard with a six-speed manual (versus a five-speed in 2009) and it will offer a CVT automatic rather than the four-speed conventional automatic from before.

The 2.5GT gets a revised 2.5-liter turbocharged boxer four with 265-horsepower and 258 lb-ft (a 22 horse and 17 lb-ft. improved over the old model). A modified turbocharger and a reduction in rpms required for peak torque – the torque curve is flat from 2,000 rpm to 5,600 rpm, Subaru says – make it both faster and more efficient than before. A six-speed manual and five-speed automatic remain available.

At the top of the range, the 3.6R model gets an uprated version of the 3.0-liter flat-six previously offered. Subaru says that the 3.6-liter six, which now uses regular fuel, puts out 256-horsepower and 247 lb-ft. of torque (compared to 245/215 from the outgoing engine). It’ll be paired to a five-speed automatic exclusively.

The CVT in the 2.5i, which is expected to make up the bulk of sales if historical figures are to be considered, is the first longitudinally-mounted CVT system in an all-wheel-drive car.

Underneath, all-wheel-drive is again standard and the suspension is significantly modified both front and rear. MacPherson struts up front and a double-wishbone rear suspension mate up with 16-inch steel or alloy wheels on base 2.5i models, while “premium” 2.5i models and 3.6Rs get 17-inch wheels. The 2.5GT receives 18-inch alloy wheels as standard. Stability control is standard across the line.

Externally, the Legacy remains about the same length, growing just over an inch, while adding over three inches to its width (now about 71.7 inches wide). Legacy adds about three inches to its height, as well.

Subaru says that rear seat room and trunk space are up, as well. The trunk will now hold four golf bags, but Subaru declined to specify exact figures.

More pictures after the break!

[ Source: LeftLane ]

You can leave a response, or trackback from your own site.

2 Responses to “Subaru unveils the 2010 Legacy”

  1. Dick Hoffman says:

    We just purchased our first Subaru: a 2010 3.6R Limited with moonroof and navigation because of the Subaru reputation. How Fuji Heavy Industries could include such a worthless navigation system (Kenwood KNA-DV3100 Ver 2.2) in the vehicle is beyond our comprehension. We’re wondering what else we’ll find our about the vehicle that is on the cheap.

    Fuji should have a complete recall of the systems and replace them with something similar to the systems (Alpine) used by Honda/Acura. I believe we should have purchased the Honda.

  2. Acejam says:


    Why do you consider the navigation to be so worthless? Did it break? I only ask because I’m not familiar with this nav unit.

    I’m surprised they included the Kenwood unit. I recently sat in the new 2010 STi at a car show, and the nav unit it had appeared to work very well. I didn’t spot any manufacturer badging though, so I’m not sure if it was made by Kenwood or not.

Leave a Reply

You must be logged in to post a comment.